If you intend to learn about networking and want to know how to start it, then believe me this article will help you understand what you desire.
You get some excellent networking tips in this article that will help you a lot.
Networking Tips Infographic
The infographic below contains some of the tips about networking that will help you get answers to most of your questions related to it. It will also help you solve some complex issues in this regard.
Share this Image On Your Site
How to Start Computer Networking? Tips For Beginners
In modern times, technology has made networking much more comfortable than before.
You can very quickly set up a small network for your office or your home.
To set up a computer network, you need to follow the steps below:
a) Check the Number of Devices
First, you need to check how much big network you are going to build.
This step involves getting the number of devices that will be on the network.
If a higher number of devices (more than 20) are to be connected to the network, then you need to get some consultants to get the wiring work done.
If you intend to set up a wireless network, then you will be in need of WAP (WAP refers to the wireless Acess Point)
b) Assigning IP Addresses
The second step involves assigning the IP address to the servers that are on that network.
If you are using windows vista or windows seven on your device, then the IP addresses will be assigned automatically to those devices.
c) Setting up the Workgroup Name
The third step involves setting the workgroup name and then assigning that name to the devices on the network.
To do it right click computer and form settings you can set the workgroup name.
d) Verify the Connections
The fourth steps involve checking the connections.
If you can see the available devices from a computer on the network, you are working.
Then it’s great.
If that’s not the case, then see the network interface configuration.
After checking them, retest the connections.
These were the steps involved in setting up the wired network.
Wireless Networking Tips
To set up a wireless network, follow the steps below:
- To name the network set a network name to your router. Then scan the network to check for the devices.
- For security purposes, assign the WPA2-Personal encryption type to your router. You will need to restart your router so that the changes get saved
- Then verify the network. If not tested, check for the errors, correct them and then reset again.
- You can also create network segments for an added layer of security.
- Also, do perform the network vulnerability assessment.
Final Words
Now you have learned about setting up your network. To set up a LAN or WAN network, knowledge about networking is not enough.
You must also know how to troubleshoot internet related problems.
Leave a Reply