Microsoft Windows updates the system to keep it up-to-date. Although these updates are for system management, yet it causes troubles sometimes.
The most frequent issue is Windows 10 not booting after the update. You can resolve this issue or other related to this one using given methods.
Windows 10 Not Booting After Update
Revert Installed Updates
- Wait patiently for the Windows 10 booting procedure to begin after turning on your machine.
- When you see round dots on your screen means the process has started.
- Now press and hold the power button on your system until it turns off.
- Restart your system and wait for the booting process to begin.
- Press and hold the power button to turn off the computer when the dots appear on the screen.
- When you turn on the computer, Windows will auto-start the auto-repair system.
- A blue screen titled Automatic Repair will display. To continue, click Advanced Options.
- It will take you to a new screen called Choose an option, where you must select Troubleshoot.
- To proceed, pick Advanced Options from the Troubleshoot screen.
- On the Advanced Options box, choose Uninstall Updates.
- On the Uninstall Updates screen, you will see two options: “Uninstall the latest feature update” and “Uninstall the latest quality update.”
- To fix your Windows 10 booting troubles, select the “Uninstall the latest quality update” option.
- Restart your computer after it is finished. Your machine should now boot up correctly.
Recover Using Startup Repair
- Windows 10 will not start can be fixed by running automatic startup repair in the recovery environment.
- To start your computer, either the Windows installation disk or a USB bootable USB.
- From the Install Windows screen, choose “Repair your computer” to launch the Windows Recovery Environment.
- Select Troubleshoot > Advanced Options > Startup Repair from the Troubleshoot menu.
- Next, choose the operating system that has to be fixed. Windows will start the repair process and then reboot.
Boot in Safe Mode
One of the best ways to troubleshoot PC issues is to boot to Safe Mode. Here is how to get into safe mode:
- Go to Advanced Option > Troubleshoot > Startup Settings > Restart
- Press F4 or F5 to enter the safe mode.
- While your machine is in Safe mode, see if the Windows 10 will not boot issue persists. If not, the issue does not relate to your default settings or basic drivers.
Checking For Errors Using Command Prompt
- Select Troubleshoot > Advanced Options > Command Prompt
- Type sfc /scannow into the command prompt.
This command will check your system files for defects or corruptions and fix them.
After you have completed the procedure, restart your computer to see whether the problem persists.
Check Errors in Hard Drive
- Start your computer with the Windows installation disk, then navigate to the following location:
- Troubleshoot your computer > Advanced options > Command Prompt.
- To show a list of supported commands, type chkdsk /? The chkdsk command has the following syntax:
chkdsk [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]]
Your computer should restart after completing the process.
Also Checkout Replace Laptop Hard Drive & Reinstall Operating System
What Do You Do if Computer Does Not Boot Up After Turning it on?
There can several reasons for this issue. Look for the following things and try to fix them:
- Check if your Monitor cable is working fine. Plug out and then plug it in again.
- Listen for the beep sound. If your computer is producing beep sound continuously means, there is some issue and check it in the manual book.
- Remove all unnecessary external devices.
- Examine your BIOS and try to detect the error through the error message. Make sure that the boot sequence is fine. If you cannot figure out what exactly the problem is, then reset your BIOS setting.
- Another solution is to boot your PC into safe mode or boot it using an external installation drive.
Windows 10 Startup Repair Not Working
Whenever Windows 10 does not boot or show any error, the ultimate way to fix this is to go for a startup repair option.
What if this option stops working as well? It has two different scenarios: it will boot repeatedly, and it cannot resolve the problem.
Solutions for Scenario 1:
- Restart your computer.
- Go to Troubleshoot > Advanced options > Startup Settings > Restart subsequently
- Select Disable automatic restart after failure from the Startup Settings page by pressing F9.
- Then, simply wait for your computer to boot up and see if the Windows 10 Startup Repair loop has been resolved.
Solution For Scenario 2:
- To repair system files, use the sfc /scannow command
- Turn on your computer for the first time, and open Command Prompt in the Advanced mode.
- Type sfc /scannow /offbootdir=d: /offwindir=d:
- When the operation is finished, restart your computer.
Windows 10 Will Not Boot After the RAM Upgrade
- Try booting your system by fixing your RAM in both sticks.
- If your system boots on one stick but not the other, you have a compatibility problem.
- Check the RAM’s specifications to make sure they are the same.
How to Boot from SSD After Cloning?
- To enter the BIOS screen, start or restart the computer and repeatedly hit the BIOS key.
- Set the computer to boot from the cloned SSD by going to the Boot tab.
- Change the boot order and make the cloned SSD the first boot device for Legacy BIOS.
- Simply select the cloned SSD as the boot disk for UEFI mode.
Exit the BIOS screen after saving the modifications. Your PC will successfully boot from the copied SSD.
Also, Read Move Programs from SSD to HDD
Windows 10 is easier than other operating systems. It has some issues that can be solved through different methods. We have tried to explain the Windows 10 not booting after update and all other alternatives.
Useful Read Fix the Reboot & Select Proper Boot Device
Leave a Reply