How to Run Ethernet Cable Through Walls (Full Guide)?

Working from home is easy if you have a strong Wi-Fi connection. We all prefer wireless connections for work as they are convenient and affordable. But sometimes, your internet connection is trapped due to obstacles.

Moreover, your data is also at risk of breach. It seems too hard. Most users also ask: how to run ethernet cable through walls? In this post, we are going to answer all of your questions.

After reading, you have the confidence to build wired ethernet connections. Let’s begin with New Zeal.

Why Wire Your House for Ethernet?

Ethernet cables are wires that physically connect a computer to a modem or router. This connection provides a better speed to your devices. These wires will deliver the high speed, the lowest latency, and the most stable network.

For this, you have to pull the cables through your house, preferably through walls. They plug into the Ethernet port on a variety of devices.

The most common use for an Ethernet cable is connecting a WiFi router or modem to an internet entry point. We need to connect one end of the cable to the router and another to the computer.

How to Run Ethernet Cable Through Walls?

When this question comes to mind, all our plans look impossible. It seems arduous and laborious to install an Ethernet connection through walls, but it is not like that. 

Planning: For every task, you need a better plan. As a wise man said: A better plan makes you a better achiever. First, plan a good strategy to establish a successful connection.

Type of wall of the house: Before establishing a route, you need to know about the type of wall. Either it is a brick wall or something else. It will help you to select tools for cutting.

The path you are going to take: It depends upon the position as well as the direction of your house.

The network speed: The network speed depends upon the type of cable you use. You need to select a good-quality ethernet for a better experience.

Tools: You will need some tools to create a route through your wall. Following are some tools:

• Drill
• Punch Down Tool
• Pointed Hand Tool
• Paddle Bit
• Drywall Saw
• Stud Finder
• Label Marker
• Finish tape
• Ethernet Crimping Tool 

Besides these tools, you also need the following things:

• Ethernet Switch
• Ethernet Wall Socket
• Ethernet Sockets
• Patch panel
• Plastic Grommet

Also Checkout Best Home Tool Kit With Drill

Run Ethernet Cable through Wire

• Create a distribution point: First of all, you need to create or build a distribution point. Before installing a distribution point, power off the main switch. It will save you from any calamities. 
• Establish holes for Ethernet cable: Creating a hole is the next step to running an ethernet cable through the wall. You will need to drill either on the top or the bottom ceiling plate. You can use a ruler to mark cutting holes for the Ethernet cable. After creating a route, fix wires through the walls.
• Label your Ethernet cables: Labeling makes the task easier. We label the Ethernet cables according to the room where the walls are. It is best for the identification of different types of ethernet cables.

How to Run Ethernet Cable Upstairs?

• Setting Ethernet Cables: Setting Ethernet cables is straightforward and labor-intensive work. The length of the Ethernet cable is a few hundred feet. Select the type of Ethernet cable. Cat5 and Cat6 are compared usually, but Cat16 is better as it is ten times faster than Cat5.  
• Powerline Adapter: It is a complete inversion of running Ethernet. They are slower and less stable than Ethernet cables. It is the easiest way to set up. In each room where you want internet, you need to plug a powerline adapter into outlets in the wall. It is installed in the existing power cable in the house. Then, it will convert the internet signal. It will run the internet through power cables and not produce any additional EMF. It reduces the total EMF exposure. Besides Ethernet cables, you need a short Ethernet cable. It will make a connection between your adapter and the device.
• MoCA: It is the acronym for Multimedia Over Coax, which involves all the cables running through the house. It makes the installation pretty easy. This option also leads to reliable signals and faster speed. If your home has cable lines (for cable TV or satellite), these lines can carry your internet. The rate is up to 1Gbps. It is faster than a powerline adapter and Ethernet cables.

Also, Checkout Ethernet Switch Vs Hub

How to Run Ethernet Cable Through Brick Walls?

To establish an Ethernet cable through a brick wall, you need to drill the wall with a hammer drill and masonry bit. When you create holes for cable, the further procedure is the same as we discussed earlier.

Best Ways to Run A Long Ethernet Cable:

Following are some best ways to run a long ethernet cable:

1. First of all, plan your network cable installation
2. Choosing Ethernet Wiring (Profinet, Cat6, Cat6A, Cat7A)
3. Cross-power the cable at a 90-degree angle
4. Use different color schemes
5. Label the cables
6. Use an effective wire management system
7. Prefer connector cables

Final Thoughts

Everybody wants a strong connection with the internet to build a relationship with the global world. For this, the wireless connection can not help us very much.

So, we use wire ethernet cables. Setting up ethernet cables can be frustrating but it is not that hard. Please refer to the complete article to learn how to run ethernet cables through walls.  

Also, Checkout How to Convert WiFi to Ethernet